
Test a hotel’s guest Wi-Fi inside representative rooms with the doors shut, and repeat the test as a guest moves between rooms and common areas. Include login, reconnect and separation from staff systems in the sign-off.
Test the guest journey
Connect from a fresh guest device, complete the login if required and make a test call or load a representative service. Repeat inside rooms at the end of corridors, behind doors and near lifts. Use a consistent device and test target.
Confirm separation with authorization
Ask the network owner to provide a harmless internal test destination. Confirm it cannot be reached from the guest network while ordinary internet access works. Record room number, time, device, signal and login behavior on one sheet.
What to check
| What you observe | What to do |
|---|---|
| Portal opens but does not complete | Record the device and where the login stalls. |
| Connection drops between rooms | Compare the handoff behavior along the route. |
| Guest reaches the test staff resource | Escalate the network isolation issue before sign-off. |
Frequently asked questions
Is a strong lobby speed test enough?
Check the rooms where guests actually work, especially room edges and hallways.
Should staff systems share guest access?
Keep guest and operational traffic logically separated and verify the configured boundary.


